Overhead hanging nozzle assemblies from Zwart Systems are a low-cost option for introducing irrigation that can provide a range of styles from mist to droplet for all growing areas.
Hanging nozzle assemblies are a simple, cost-effective system to introduce overhead irrigation to growing areas. There are many nozzles to choose from that can provide anywhere from a mist for propagation to an irrigation style droplet.
Overhead nozzle systems could water a 24’ wide x 120’ long greenhouse of 4” pots in 20 minutes with 95% consistency. It could be used to disperse Nematodes or to add humidity to a young poinsettia crop.
We draw from both Netafim and NaanDan systems to provide the best result for the grower when we design a project.
From the Ground Up
At Zwart Systems, we offer complete design, manufacturing, installation, and service of all our products. We can help create a system that's right for you.
Overhead Nozzle Overview
Simple to install, this system hangs from a guidewire installed in the middle of the bench or house overhead. Nozzles located at 3-foot intervals disperse water at a 95% uniformity and are available for mist or irrigation.
It is a very cost-effective, flexible growing tool.
Options, Applications & Benefits
- System Options
- Poly tubing or PVC pipe installations
- Overhead watering
- Humidity control
- Nematode distribution
- Consistent uniform watering
- Low maintenance
- Increased crop uniformity
- Cooling and humidity control (fog)
- Labor savings
- Rapid system payback
- Simple to install
- Low cost
- Spray up to 24ft width with just 1 row of hanging nozzles!